Powermate 7500/6000W Cosense Generator (model PM7500)

Powermate PM7500 COSENSE Generator

Manufacturer: Powermate
Model number: PM7500
Power source: Gasoline
Motor size: 420CC
Weight: 170 lbs

Quick Start Operation | PM7500

The Powermate PM7500 COSENSE Generator features a “PowerDial” design.  What is the PowerDial?  It integrates what are usually 2 different switches on most generators; the on/off switch and the choke/run switch. The PM7500 has a single switch to toggle from off to choke to run.  It’s also conveniently located on the front panel (not half-hidden on the engine like some other generators).  It makes it very easy to put the generator in the right setting before pulling the recoil start cord. This may seem basic but it is appreciated as an extra step to limit the chance of a new guy or inexperienced homeowner accidentally flooding the engine and delaying use of the generator.

We’ve used generators in the past that were a workout to pull start. That is not the case with the Powermate PM7500 COSENSE Generator. To get a good feel for the ease of pull starting the PM7500, I had my wife try to start it. What would happen if I wasn’t around during a power outage?  She was able to start the PM7500 within 3 pulls. That satisfied my criteria quite well!

Safety Features & Design

We at Tool Box Buzz live by the goal of never adding temporary safety risks to a job site or home unless absolutely required and controlled. The PM7500 COSENSE Technology exemplifies this commitment! The Powermate PM7500 COSENSE Generator has an internal carbon monoxide sensor that measures the CO levels in the ambient air around the machine.  If the CO level registers at an unsafe level then the machine automatically shuts off. Carbon Monoxide poisoning is a serious safety risk and something OSHA regulates for good reason. Another OSHA-compliant feature of the Powermate PM7500 COSENSE Generator is the standard GFCI outlets. The PM7500 with COSENSE is designed to keep you safe and safety compliant which we love here at Tool Box Buzz.

The Powermate PM7500 COSENSE Generator also has internal safety features. While these are pretty standard features, we thought it was worth highlighting as the machine would be at higher risk of damage without them.  They include:

• Top located Fuel gauge
• Hour Meter: to ensure you stay up to date on essential maintenance
• Low-Oil Level Shutdown: Prevents engine damage
• Covered outlets: Provide protection from the elements/dust/debris
• 25A Circuit Breaker: prevent circuit overload & electrical damage

Power & Performance | PM7500

The Powermate PM7500 COSENSE Generator is powered by a Generac 420CC OHV Engine. We love Generac engines.  They are durable and low maintenance.  These are essential features on a job site or in a home power/weather emergency situation. The 420CC’s equate to 10 HP. This, combined with an 8-gallon tank, give you 11 total hours of runtime at 50% load (14 hrs at 25% load). We ran a 160 Amp MIG welder, multiple grinders, a job-site 10″ table saw, and multiple 18-20V battery chargers in a variety of combinations throughout the workday with zero power-supply issues.

We also appreciated the mix of outlets. Specifically, we liked the addition of the 220V, 30A (NEMA L14-30R) outlet.  This worked great for some of our MIG welders but also allows for easier circuit panel (or RV) hook-ups. we tested it out using a 20′, 10GA heavy-duty extension cord and it worked like a champ. The picture below also shows the rubber, weather-resistant outlet covers. These did a great job keeping out dust and dirt on the job site throughout the week and seem designed to last.

Mobility Features & Design

The Powermate PM7500 COSENSE Generator sports well thought out integrated handle and wheels. We almost included this in the safety section since lifting a non-wheeled generator is an injury waiting to happen; the PM7500 weighs 170 lbs. The handle folds down for easy storage.  The wheels are large enough to easily roll over gravel or dirt surfaces.  The wheels are also solid plastic so there is no risk of getting a flat tire on a job site.

Final Thoughts |PM7500

The Powermate PM7500 COSENSE Generator is a great generator.  It offers ample power to support a wide variety of tools on the job site. It also has enough power to provide for basic needs at home in a power loss emergency. The run time is excellent and won’t require you to top off the tank on your lunch break or in the middle of the night.  It is easily portable with an integrated handle and wheels.  And best of all, the PM7500 has some great safety features built in to include a carbon monoxide sensor + auto-shutoff and standard GFCI outlets. The only recommendation I have for Powermate is that, for the price point, they should consider including a generator cover. This is a very low-cost add-on that can make a difference.

Powermate PM7500 Cosense Generator Review is a post from Tool Box Buzz